Brake system

Many people complain about the work of the Nexi Nexia's staff braking system, which may be a very difficult task to change. You can put a sub-port from Chevrolet Lanos in place of the regular sub-ports. They are deprived of these problems and are fixed without modification

The starter is a guarantee of the safe operation of the car. If the manual (parking) brake has ceased to function, it must be adjusted

A headset, a jack, a balloon, a 14, a large screwdriver or a slit, silicone grease, would be required to work

To replace the rear brake pads on the Caliber, you must: 1. Remove the car on the parking brake, stop and remove the wheel .2. Delete the parking brake. Scroll the cover of the brake disc expansion cover.

brake system pressure regulator ("wizard") is used for the distribution of the ratio of the braking force to the axles

Drum rear brakes were installed on all vehicles with 1.6 litre engines. Motor vehicles 1.8 l. may be optionally equipped with disc rear brakes. Two-litre dual car vehicles were equipped with disc brakes only

Most hand brake problems are connected to the cable. If the handbrake is raised too high (more than 4 clicks), you need to pull the cable. If in cold weather the handbrake does not work on uncompressed pads-then the cable freezes in the "shirt" (rope-rouble cable)

The brake pads on the VAZ-2110 need to be changed in the following cases:-The thickness of the friction linings is less than 1.5 mm.

The peculiarity of the cars produced in Europe and Russia is quite unreliable front line brake hoses. The Tecs and the breakup began at a distance of 70,000 km. To find the calc, it is necessary to look at the front wheel arch

Crossing the first generation of the first generation from the other car, the driver may notice the excessive brake pedal response: the machine is minting "Coke" even with a light touch. This is not a malfunction