Car body

The third generation Ford Fokus is not always available for sale, but it is possible to install a second-generation model without major alterations. Maybe we'll have to get some bumpers in the lower part.

If the baker on the windshield VAZ-2110 is a big fat heist, it is more likely a problem with the oven radiator. Another likely source of the problem could be the huddened hammouts and patrons.

The bonnet emphasis of the bonnet is simple enough. First, it is necessary to reattach the upper hinge of the bonnet and set the gas emphasis. Then, it is necessary to twist the anchorage bracket and install the anchorage

A heated windshield is a rare option that has been installed on Focus since the first generation. You can install the windshield independently, but you will need experience: some of the transaction will need to be built independently

You can replace the door hinges with chrome and cover them with the lower part of the neat black lining. The number for the order of the loop is 69410-51010, it will take 4 pieces, the price of one-about 600 rubles.

There is a rubber "skirt" on the front bumper at all the first Fokis. It's pretty often falling off or starting to grate in the front. Most often, its fixings suffer from sutomes and kerbs

The large cells of the raised-radiator grill are used to skip the small stones and the dirt that might damage the heat sink. Metallic grid is installed between the heat sink and the plastic grill to secure the heat sink

The part numbers that are needed are: 69210-58010 69217-58010 69217-30040 69227-30070 You do not need to remove the front door lining of the linings. To install the front handles, follow these steps:

Not only is it possible to see on the hood of the car not only traces of the flowing fluid of the liquid, but also the damage to the paint. To eliminate the flow, you must install the non-return valves. Models from Volvo and Toyota are coming

A number of body elements require periodic grease. The hinge of doors and the mechanism for limiting the opening shall be lubricated by engine oil