Car body

Hyundai Tucson's windscreen-glass water trys are too weak

Hyundai Tucson's windscreen-glass water trys are too weak
The most common reason is that the Hyundai Tuccon's noodles are too low. Each nozzle can be adjusted vertically and horizontally with needles

The back door of Hyundai Tucson is a few millimeters

The back door of Hyundai Tucson is a few millimeters
Uneven gaps in the luggage compartment door may indicate that the car has been in an accident, and after repairs the door was not adjusted as necessary (or the body geometry)

Jaguar XF tank cover

Jaguar XF tank cover
Many owners of the Jaguar XF notice that the metal cap of the petrol tank is either curve or loose. It also sometimes interferes with her normal opening. The problem is in the [ [ torstailingage]] cars, and in 2012 it was decided

Painting of paint on top of Jaguar XF hood

Painting of paint on top of Jaguar XF hood
The owners of the dorestylon version often encounter the plush of paint and the appearance of rust hotbeds on the trunk lid, at the junction of the chrome lining with the boot metal

Problems with the Jeep Grand Cherokee WK2

Problems with the Jeep Grand Cherokee WK2
The Kouk details of the WK2 Gip Grörkörki are sufficiently reliable and durable

Bits in the back of the Jeep Grand Cherokee WK

Bits in the back of the Jeep Grand Cherokee WK
If the small bumps of the Jeep Grand Cheroki WK's luggage compartment is dripping, then it is likely that it will be necessary to disassemble the skin and search for the source of extraneous sounds. To do this: Detach the clips and remove the back door.

Installing an additional grid on the grille of the Jeep Grand Cherokee WK

Installing an additional grid on the grille of the Jeep Grand Cherokee WK
Through the holes of the Jeep Grand Cherokee WK, stones are often found that could seriously damage the heat sink. To prevent this, you can install an additional grid on the grid. We work like this: We find a small metal grid

Installing a headlamp on the Jeep Grand Cherokee WK

Installing a headlamp on the Jeep Grand Cherokee WK
To install a headlamp on the Jeep Grand Cherokee WK, you will need 2 screwdrivers, a key of 19, a key of 24, and a head for 24. We're setting the traction device in this order: Take off the spare wheel.

Dismantling of external doors of KIA Cerato II

Dismantling of external doors of KIA Cerato II
To remove the outer handles of the doors on the Kia Serato 2, you need to do the following: 1. Open the door and remove the lock filler from its end 2. The screws that hold the handle 3 are located under the pluds. Remove the interior lining of the door and release the handle from traction 4

Dismantling of fillers under the KIA Cerato II front fog lamps

Dismantling of fillers under the KIA Cerato II front fog lamps
Not all Kia Cerato of the second generation were equipped with fog lamps. To remove the filler plates mounted on the front fog lamps on simpler modifications, you will need a Phillips screwdriver and a jack. You need to do the following: Remove the wheel