Car body

The triangular plate of the mirror is easily removed. We need to put it on the side of the glass with a screwdriver or other suitable instrument and pull it on. One can not be afraid to make an effort, because the pistons that hold the blank filler are strong enough

To replace the lock with a lock on the A4 4th generation, we do the following: Remove the larvae and magnet (for a car with a system of unkeyed access).Unlock the facings on the front side of the door and turn the clip upside down.

To remove the radiator grille on the 4th generation of 4th generation, it is necessary to remove the bumper. Then we remove the damped element. To do this, unscrew the two screws at the top of the grille, detach the meter connector, and pull the connector from the arm

To remove the filler in the bumper, it must be pressed to the bottom of the bumper, so that the filler is removed and a click is heard. It can then be removed

The front bumper on BMW 1 of the second generation is in this sequence: Scrolling all sea-cutts from the bottom of the bumper and pulling out two clips. Start the car and turn the rudder to the left.

To remove the front bumper, you will need a screwdriver, 10 and 7 mm and 5-10 minutes of free time. The front bumper of the BMW 3 E90 is removed as follows:-It is necessary to open the hood and remove the rubber gasket.

Each color that can be painted in the KIA Rio III at the plant has a three-letter designator called code

The disassembly of the BMW 3 E46 sedan is carried out in the following order:-The first thing to do with the "asterisk" T-50 2 long bolts located in the lower part of the bumper

To reach the left nozzle of the BMW 3 E90, it is enough to remove the wheel, to uncover the covers and replace the nozzle. If you need to replace two injecpipes or only the right, you better use another way to get to them by removing the front bumper

KIA Rio III belongs to the category of budget vehicles, so its soundproofing is far from ideal