On the Polo Sedan, the lights in the headlights are easy to access. The lamps must be removed, and the slot must be removed before it can be removed. If you do not get a red check in the slot, you can use a thin screwdriver.
The LEDs are set in the third stop-lamp. To replace them, you need to unroll the smores from the boot side and disconnect the wiring connector.
You'll need a thin screwdriver to replace the light bulbs. We need to put pressure on the fixation between the lamp body and the window in the trunk of the trunk. The pressure is needed carefully, otherwise it is easy to damage the layer of paint.
