To remove MAINT REQD on the dashboard, complete the following steps: turn off the ignition, press the reset button for the mileage, and hold it. It is then necessary to start the ignition, with the odometer reset button held until "000000" appears on the display.
Before removing the inscription, you need to replace the engine oil. The point is that the message indicates the need to replace the oil. If the oil is replaced, but the record cannot be removed, you can try another way.
You need to put the key in the ignition and start the engine. Then rotate the key in the 'ACC' position. Then press and hold the TRIP/ODO button. Leave the key to the ON position by turning the ignition switch. The display should display six checks. The button must be held until the lines disappear. The display should return zeros again.
