Replacing an anti-freeze circuit with the Toyota Prius NHW10-11

1. The first thing you need to do is open the radiator filler cap.
2. Uncover the cover, detach the hose from the radiator with the expansion beam.
3. The butternet himself needs to be removed, leaked and rinse and put back in place.
4. After that, you need to get under the car, spin the white cap on the radiator, and drain the antifreeze.
5. The next step is to open the engine's cranioise, which is on the engine, from the saloon to the exhaust manifold and to drain the other antifreeze.
6. Now we need to fill up the fresh antifreeze to the radiator and the tank and shut down the cork.
7. After that, you need to have a car and let it work for idle for 10 to 15 minutes.
8. If necessary, you need to finish the antifreeze up to the highest level.

Add comment