(1) The front spray suppression and the protection of the engine shall be removed.
(2) Extract the top of the radiator boner and remove the sealant.
(3) Scrolls the two nuts of the decorative cover of the engine and take it off.
(4) The exhaust of the air filter.
5) Disconnect the connector of the mass air flow sensor and obtain the wire from the air filter holder.
(6) Do not trap the holder and remove the filter cover.
(7) Hose the air filter shall be removed.
8) Disconnect the oJ temperature sensor connectors and the additional heater.
9) extract wiring harness from the retainers.
(10) Two bolts, remove the air intake outlet.
(11) In the anti-nut-clip of the clip, turn the screw clockwise and remove the polycunny belt of the additional heater.
12) Remove the bolt and nut by removing both tension clips.
13) Rotates the tenor clockwise and remove the main drive belt.
