To change the candle light on diesel TOYOTA LAND CRUISER 200, you must:
(1) Delpate 5 bolts and remove the plastic skin of the intercululus.
2) Scroll 3 bolts and remove the interculler.
3) Detach 4 bolts and detach a pipe connecting the interclair to the turbine. Pack it to avoid contamination.
4) Disconnect the vacuum sensor.
(5) Remove the interculler.
(6) Disconnect the EGR pipe from the intake manifold, block and throttle and remove it neatly.
7) Dele 2 nuts and 1 bolt and remove the throttle.
8) Remove the protective caps and disconnect the contact tyre from the candle.
(9) Actively draw out the candles.
(10) At the same time, it is necessary to clean the throttle, as it usually forms a large amount of tanning.
(11) Set all the details in reverse order.
