Removing the GRM chain from the Toyota Avensis 2

To remove the GRM chain on Toyota Avensis 2, you need to: Remove the right panel. Remove the right wheel. Remove the right wheel. Unprotect the engine. Remove the coolant. Release the two nuts and remove the decorative cover of the engine. Remove the strap of the generator. Remove the crankcase shock absorber. Remove the engine-button.Remove the cover of the HBCD. Remove the wheel of the first cylinder. Remove the wheel of the shaft. Remove the wheel of the shaft. Remove the wheel of the wheel drive.

1. Remove the heat sink panel.
2. Remove the right panel.
3. Remove the right wheel.
4. Unprotect the engine.
5. Liquid coolant.
6. Rend two nuts and remove the decorative cover.
7. Remove the generator drive belt.
8. Unscrew the nut and bolt, remove the receiver, and roll the tube.
9. Remove the generator.
10. Disconnect the crankcase ventilation hoses.
11. Remove the engine-pylon shock absorber.
12. Remove the HBCD cover.
13. Set the piston of the first cylinder in the Tcycle of compression.
14. Remove the wheel of the knee.
15. Remove the tenor of the belt.
16. Remove the engine-mount arm.
17. Unhook the chain.
18. Remove the DPAC rotor.
19. Unhook the chain.
20. Unchain.

Add comment