To replace the spark plugs, a candle key must be used on the "16" length of at least 22 cm (deep wells) with rubber compaction inside, hexagonal key "5" and a normal key on "10". The replacement shall be as follows:
1. Disassemble the duct above the engine;
2. With the help of the Handerer, remove the retaining screws, remove the cover;
3. By using a key of "10", roll two bolts for the ignition coils;
4. Discard the ignition coils using a screwdriver and a pair of pliers;
5. By using a special key for "16" to remove the spark plugs;
6. Reverse the fitting of the candles.
Two types of candles, G23D and G32D, are used in the car, and new candles must comply with the previous one. The replacement of candles is done every 30 thousand kilometres.
