Engine

The Jip Grand Cheroki WK fan turned out to be the symptoms of high noise and fan operation at any engine temperature

One of the most common problems facing the owners of CIE Sid 2 is the vibration of the engine at low speed (1000-1500 turnover). If the vibrations of the engine at KIA ee'd II are observed in the new car, there is no cause for concern

The actual fuel consumption for Kia Serato is the second generation: Car with MCCI and motor 1.6 l: in the city in the summer from 8 to 9 to 12 liters, in the city in the winter about 10 to 12 litres, on the 5

The manufacturer selects the owner of Serato 2 between 92nd and 95th petrol. The owners ' experience shows that the 92-go costs will be a little higher-0.5-0.8 liters per 100 km. In urban areas

The two engines installed on the Kia Serato 2 have a GRM chain drive

The Met owners of Kea Serato two are faced with the replacement of the fuel filter by an independent replacement of the fuel filter

There is no engine temperature indicator on the standard dashboard in KIA Rio III. Instead, the blue LED indicator, which is lit when the engine starts and goes off when the normal operating temperature is reached is 60 degrees

A few tools will be needed to replace the KIA Rio III candles with a 16-inch key with a long handle (at least 20 cm) with a device to hold the candle after the lashing.

To start the KIA Rio III engine, which is equipped with a Start button instead of the ignition switch, press the brake and the Start button at the same time

The most common motors in Russia on the fourth generation of the fourth generation are the 2 litre units, with the capacity of 101 hp. They are considered the most reliable and unassuming