The water indicator in the filter shall be triggered when the water collection capacity is filled fully. In this case, remove the water from the filter:
1. To filter the water collection tank;
2. Rotate the cork at the bottom of the filter counterclockwise (if you look at the filter below).
3. Wait until clean fuel flow is removed from the cork;
4. Enlock the cork and then pump the pear pumps.
If there is no water in the filter and the indicator on the dashboard is lit, the problem is caused by the failing water sensor or connector. You need to check the connector first-it may have got water in it. If this does not work, the sensor should be replaced. The sensor is at the bottom of the filter, it is mounted on the cork.
