The temperature sensor of the coolant to Lifan Solano is installed in the housing of the distribution tube.
If it fails, the engine may be unstable and an error is reported in the engine management system. To test the sensor, disconnect the connector and turn it off with a key of 19. The opening of the sensor will need to be immediately closed by a suitable cork so as not to be crowing out antifreeze. Then we put the sensor in the hot water and measure the resistance between conclusions 1 and 3. It must be equal to: The temperature will be + 4-9 ˚C at night, + 20-25 ˚C in the ˚C in a day, + 20-25 ˚C in the night, + 20-25 ˚C in the day.
- At 80 degrees-0.32 ohms.
- At 60 degrees-0.59 ohm.
- At 40 degrees-1.15 ohm.
- At 20 degrees, 2.31 ... 2.59 ohm.
