Safety

A similar problem is encountered by many X-Type owners: inside the lock something breaks and the buckle stops entering the back part. This can be inserted by pressing the button on the back of the lock

This airbag shall be disabled if a car seat is fitted to the front seat. In Rio, this seat is fitted to the rear seat, which is fitted with a special attachment

The installation on Peugeot 207 remote launch of the engine from the beam is possible with the installation of a non-state alarm that supports the remote launch function of the engine

This zummer in KIA Sorento II is included at a speed exceeding 20 km/h, the signal lamp shall blink at a speed of more than 9 km/h. If the safety-belt signal does not work, the cause is hidden in the fuse or the bad contacts

It is not easy to remove the front head restraints, whereas the rear head restraints are removed in a standard way. The thing is that the front head restraints are active. Inside them is a rope which is responsible for applying the head restraint forward at the rear (safety system)

If Peugeot's ignition switch 207 was broken or lost, a duplicate must be made. The easiest way to produce a duplicate key for Peugeot 207 is to contact an authorized dealer

The signal sounds throughout the road every three to five minutes. Such signals may appear (immobilizer) if the battery is in the label. So first of all, you need to check the label

If the light is on permanently, there can be several reasons for this. Most often, it turns out that it is not in the order of the pillows (either fell off or forgotten to insert it)

After replacing the battery in Peugeot 207, the key must be initialized. To do this: 1. Insert the key into the ignition switch; 2. Turn it to position II; 3. Press the locking button and hold it for 10 seconds; 4. Turn off the ignition.

Of course, that pillow needs to be replaced. But there are cases in which the same crack (line of rupture line) appeared again after a week