To change the rear thrust of the stabilizer and the tuller on Vektra C, perform the following procedure:
1) Install a machine on the hole
2) Put emphasis on one side of the car and the jacks on the other.
(3) Twoway, on the one hand, do not touch the T-50 BIT key, the second bolt is not touched.
(4) Repeat the steps for the other party.
5) The key "on 10" is the bolt for removal of the bushing.
(6) Remove the tuller from the other side.
7) Unwind the second drive bolts and pull the bolts from the stabilizer.
We're gonna get new cravings and tulls and we're gonna put it all back together.
