Technical fluids

Many owners of Chevrolet LaCoyti are concerned about the oil from the mechanical checkpoint of the car from the plant. In fact, it is simply impossible to find official data about the oil brand for the IBC Chevrolet Lactti.

The manufacturer recommends changing coolant in the Dodge Caliber at least once every 5 years or 150,000 km. mileage. Appropriate antifreeze-G5, tolerances MS-9769, MS-9769G.Concentrt MOPAR, 3

The DOT-3 or DOT4 braking fluid can be filled in in Mazda 6 of the first generation without mixing them. It is necessary to change the brake fluid every two years or 40,000 km. mileage

In the first generation Ford Focus needs to be filled with the engine oil of the WSS-M2C913-B or WSS-M2C913-A specifications. The original oil-Ford Formula E 5W30, it is poured from the dealers of the brand. This oil is formally mineral, as it is made for hydrocracking technology

If the car is designed for the American market, it is necessary to fill the coolant with ESE-M97B44-A, Ford-order number-E2FZ-19549-AA, Motorcraft-order number for order-VC-4-A, this is a green liquid. You can also pour a yellow antifreeze to Motorcraft, order VC-7-A

The various modifications of Mercedes-Benz C-class (W204) are distinguished by the following filling volumes: Fuel tank-66 l (on models with V-shaped motors and some models with ordinary motors), 59 l (on other models). The minimum level is 8 l

Ford's coolant temperature sensor 3 has features. Unlike other cars, it does not show actual temperature, but has several modes

The following technical liquids are filled in the first generation: Engine oil: 4.2 litres, including oil to be filtered (3.7 litres). without filter), SAE 5W-30Mechanical gearbox: 2.3 litres, SAE 75W-90Cooling system: 5.75 litres

-A fuel tank-69 liters in the short-heat and 88 liters. -Engine oil (full volume with oil filter and oil radiator)-9.8 liters (for motor 3, 2), 4.9 litres (for 3.0 and 3.8 litre engines)

In Fusion, equipped with a 1.4 or 1.6 litre diesel engine, it is recommended to fill the Ford Formula F SAE 5W engine or any other with viscosity 5W-30, corresponding to the specifications of WSS-M2C913-C, WSS-M2C913-B, WSS-M2C913-A, ACEA A1/B1