- Details
-
May 22, 2023
-
Written by Jason Hance
For KIA Spectra with the ICAC, it is characteristic of the engine at the start of the engine, after the car was in gear. It's only in cold weather. The reason for this behavior is that the synchronizer's ring is adjacent to the gears of the gear included
- Details
-
May 21, 2023
-
Written by Jason Hance
First of all, you need to make sure that the transmissive liquid is leaking, not the motor oil from the BMW 3 E46 engine, which can be dribred into a transmissioner's crankcase.
- Details
-
May 19, 2023
-
Written by Jason Hance
The Stall-Test is a simple method of checking the state of the ACPR in a BMW 3 E46 car (as well as other cars of this brand). This test determines engine speed with a fully squeezed throttle control and a braked car
- Details
-
May 18, 2023
-
Written by Jason Hance
If during the KIA Spectra movement, this indicates mechanical deterioration of the gearshift mechanism, which may be caused by an insufficient level or almost total absence of oil in the ICAP
- Details
-
May 18, 2023
-
Written by Jason Hance
The ticks are not raised in the box itself, but at the junction of the PPC output with the internal Shoulder and the half-axis
- Details
-
May 16, 2023
-
Written by Jason Hance
The hardened inclusion of all gears (for gearshift and repeated clutch pedal) is usually associated with damage to the clutch, and more precisely because of the deformation of the diaphragm springs
- Details
-
May 15, 2023
-
Written by Jason Hance
Noise of switching to KIA Spectra may be caused by a drop in the level of transmission oil in a gearbox or by poor quality. The fall of the level may cause wear on the MCP's of the MCP.
- Details
-
May 14, 2023
-
Written by Jason Hance
The gearshift gearbox can occur when the ghak is relaxed on one of the ShRUs. Accordingly, the problem is reduced to the verification and delay of all the gears connecting the gearbox and the internal joints
- Details
-
May 12, 2023
-
Written by Jason Hance
Over time, the majority of Tieggo with the "machine gun" has had to make a great effort to change the position of the lever. This is particularly evident when the selector is moved from position P to other locations
- Details
-
May 11, 2023
-
Written by Jason Hance
If the KIA Spectra's clutch pedal clutch fails to disperse, from a technical point of view, the problem is likely to be that one of the plates connecting the stubborn flange of the clutch is broken or detached