Even with new gaskets, the water enters the Lada Kalina door cavity. A stork is provided for its drainage to drain holes, which is secured by a bitumen sealant at the lower edge of the glass pane and is freely hanging down. During the installation of acoustics, noise insulation, the repair of glass lifts are often torn off. As a result, the water enters the interior panel of the door and then through the process openings into the passenger compartment. You can cut the torso out of the skin. The length shall be such that, when raised to the end of the glazing, it shall reach the lower edge of the door. The Stork can be glued with silicone sealants or use clamp clamps. At the bottom, it is also desirable to dock it at 3-4 points, but not all the length so that the water calmly went through the drainage orifice.
