To replace the brake pads on the first generation Mazda, you must:
1. Remove the car from the right side.
2. Remove the wheel.
3. Attach the nut that attaches the brake hose to the cushioning rack.
4. Align the tulk (digit 2) using the hex wrench.
5. Insert point-key-key (digital 3) between the inside and telescopic pump, pressure the pump into the pump, and push it inside. She's got a picture of her in the picture.
6. In the direction of the stockholder, the pad shall be released by the springs.
7. Install the springs and new pads.
8. Close the holder, rotate the tuner (number 2), and rotate the nut, securing the brake hose to the cushioning rack.
9. Pump the brakes.
