The front bumper of Nissan Almera Classic should be removed as follows:
1. Delete the three pistons located in the front of the loker on either side.
2. Replay the two screws on each side of the bumper. They're at the bottom of it.
3. Demonstrate 5 pistons holding a dusty skin.
4. Render 4 screws to hold the radiator grill.
5. Scroll down two bolts holding the bumper in the area of the front wings
6. Disconnect the turning signal connectors and the anti-control slots (if any).
Now you can remove the bumper by pulling it on you.
