To dismantle the door to Nissan Almera Classic, it is necessary to twist the carrot in the bottom of the door and unbuckle the clippers from the top of the internal end. The next step is to pull the upper arm of the armrest panel with a decent effort. It has two carrots that hold the window-lift control unit. Once the bolts are uncut, you can remove the entire card. The glass carpenter is likely to fall.
Then we need to remove the polyethylene, which is under the skin of the door. To do this, he needs to pull on himself and cut the sealant with a sharp knife. After removal of the film, it is possible to replace the speakers in the doors and to prole the door with noise and vibration. I'm not going to tape the tape back. The foam in the inside of the door cavity may not be installed back.