The original heated mirror element for Mazda 6 I is very expensive, but there is an alternative way to solve the problem.
It is necessary to purchase the heater elements for insular. You can't cut the heater heater, so the contour of the heating element should be no more than the mirror of Mazda 6.
To remove a mirrored element, you must install it inside and up, and the outer bottom angle must be maximally withdrawn from the mirror. In this position, you insert a flat-blade screwdriver and detach the mirrored element from the mirror, not the mirror itself. You need to be careful. There may be a loud cracking noise in the process.
Now you need to use a flat-blade screwdriver to free the mirror from the garter and pull back the heating element. A new heating element is taping to his place. In the case of a reverse installation of the garters, it is not possible to shut it down and put pressure on the mirror. It's very fragile and it breaks easily. Once the tie has been installed and the electrical connections are connected, the mirror can be installed in the mirror.
