The calibration of the window-lifts is necessary after each battery disconnection. To adjust the window lift, press the lift button and wait for the glass to rise completely. After the glass stops, you need to hold the key pressed again for a second or two seconds. After that, you have to release it and press it three more times. Next, you need to repeat the same operation when you release the glass. Then the automatic window-lift mode should be reworked. If this does not happen, All of the above steps must be repeated.
- To adjust the lift, press the lift button and wait for the window to rise completely.
- After the glass stops, the key is pressed for another 1 to 2 seconds.
- The key must then be released and pressed three more times each time it is held in the pressed position for about a second.
- Next, you must repeat the same operation when you are lowering the glass.
- Then the automatic window-lift regime should be launched again.
- If this is not the case, the above steps must be repeated.
