Replacement of the wiper blade at the Citroen C4

Replacement of the rubber band of the wiper blade in Citroen C4 will avoid the complete replacement of the windshield wiper. To clear the brush. You need to remove the two extreme plastic fillers by fitting them with a thin, flat-blade screwdriver. Mark the rails "top" and "bottom" for the comfort of the back assembly and the fixation of the fixation element on the stack. The thickness of the new rubber band should be the same as the thickness of the original.

1. To clear the brush. You need to remove the two extreme plastic clips by removing them with a thin flat-blade screwdriver.
2. Mark the guide "top" and "bottom" for the convenience of the return assembly and the fixation of the brushes on the glass.
3. Length of new rubber: left not less than 700 mm, right-650 mm length. The thickness of the new rubber band shall coincide with the thickness of the original rubber.
4. Further cut the rubber band in length at the point where the groves are not cut to the end.
5. Then put the rubber band on the rails on both sides.
6. Gently put the necessary number of rubber bands through the glass latches.
7. Attach plastic fillers on both sides.