To put an additional protective net on the grille of the Chevrolet Capptiva C140 heat sink, do the following:
(1) Move the bumper.
(2) The front fog lamp and the hose from the lamp of the headlight washer, preloaded the receptacle for the discharge of the liquid.
(3) Be careful to remove the bumper.
(4) Plamppers of the bumper.
5) Put the mesh on the lower inner part of the grid and by cutting the snap-holes in the grid into the snap-rails.
(6) With the help of the short self-cut, the net to the speakers ' ears of the grille shall be fixed.
(7) A grid on the contour of the grid with a small supply.
(8) Extra mesh in excess.
(9) With the help of the hotomes.
(10) Similarly, set the top grid.
(11) Install everything in place.
