Removal of the front bumper to the Audi 100 C4

Procedure for the removal of the front bumper at Audi 100 P4:

1. Let' s take off the lower protection of the engine.
2. Removes the lower inserts of the heat sink.
3. In the bars on the left side and on the right, round one bolt.
4. Open the hood and unwind the panels under the headlights.
5. If there is a headlight, remove the nozzle, and remove the tube panel.
6. Two bolts in front of the headlights.
7. On the models until March 1992, screw the wheel archer.
8. Remove the side portions of the bumper to the side.
9. Let' s take the bumper forward.

Add comment