Remount the heating of a fourth generation Audi mirror as follows: We use the knife to separate the plastic and remove the remnants of the tape. Below them there is a transparent film that we remove from the edge. We look at the heating tracks and find a circuit in the chain. We connect the gap with the jumper. It is also possible to include the warp of the power consumption in the chain.
- Use the knife to separate the plastic and remove the rest of the tape.
- There is a transparent film that is removed from the edge.
- We're looking at the heating tracks and finding the ring in the chain.
- Connecting the gap with the jumper. It is also possible to include Varvestor limits of power consumption in the chain.
- Adhesive tape, tape, and seal the mirror.
