To remove the PSC of Peugeot 207, you need to:
1. Remove the two plastic casing attached to the latch;
2. Detach and detach the bolt (key 8) for the terminals;
3. Raise the red flag up and detach the plush clamp;
4. Undetach the connectors, remove the controller to the left of the KB. To do that, you should pull it up and a little bit. The controller is attached to a plastic cover and is held by the latches, so you need to make some effort.
5. Lip the lever to the right of the battery.
6. Hold it in this position, tilt it to the left, and then lift it up;
7. The assembly is reversed.
After the battery is connected, the ignition shall be activated for 60 seconds. is required to initialize the electronic systems. In addition, it will be necessary to re-train the window-lifts, the hatch and the permanent alarm system.