The procedure will require a smooth, no-gradient, wall. The adjustment is best done in the dark. The distance from the headlamps to the wall shall be 3 m. First of all we need to measure the distance from the center of the headlamp to the ground and put points on the wall at the same height. A line shall be drawn between the points to be the maximum permissible line of headlamps. Now you need to turn on the dipped-beam headlamps and open the bonnet. The tilt adjustment screws are located in the submachate space behind the headlamps. To lift the lens, roll the screw clockwise to lower the screw clockwise. The line of lights is to be aligned with the line on the wall.
