To replace the backlighting lamp with the Kiia Serato 2, you first need to remove the backlight (s) with a flat-blade screwdriver. After that, you must remove the plafers by turning them counterclockwise and pulling them down. Then you need to install new lamps. The assembly is in the reverse order.
It should be remembered that the glass surface of the lamp cannot be touched by hand, as it can significantly reduce the length of its service. When installing LED blocks instead of normal lamps, it must be borne in mind that the space under the illumination of the registration plate is very small, the diode block of dimensions shall not exceed the standard lamp. Also diodes are more sensitive to the strains of the vehicle's side network, they will have to change more often.
