If the power drive is down, it is possible to use manual control. To do this, you need to:
1) Open the cover of the secondary mirror.
2) Use a Phillips screwdriver to unscrew the two screws at the top of the upper console.
3) Remove the console, find the socket under the hexagon.
4) Insert a hexagon (it shall be located in the trunk or in the glove compartment).
(5) Rotate the hexagon clockwise to open the hatch and counterclockwise.
(6) Reload the power of the hatch:
- (a) Ignition start;
- Click on the TILT UP button for more than one sex to fully lift the hatch.
- Press and hold the TILLT UP button until the hatch closes and then goes up a little above the maximum position.
- push and hold the TILT UP button more than 5 seconds to fully close the hatch.
