1. Turn the ignition on the Honda CR-V III, turning the key into the "ON" position.
2. Lower the driver's (or passenger) glass down to the driver's seat by using the DOWN key on the driver's window
3. Open the driver's door. The intervals between the following four points should be five seconds.
4. Turn the ignition switch to the OFF position.
5. Press and hold the DOWN key on the driver's side (or front passenger).
6. Turn the ignition on by turning the key to the "ON" position.
7. Release the DOWN key of the window-lift on the driver's side (or front passenger).
8. Repeat these four steps three more times.
9. Verify that the AUTO UP and AUTO DOWN keys are not active. If the lavicas were working, it would be necessary to move back to paragraph 1.
10. Lower the driver's (or passenger's) window to the driver's seat by using the DOWN key on the driver's driving unit
Press and hold the UP key to the driver (or front passenger) until the window is fully closed. Then, hold down the key for a second. If the result has not been reached, the entire process must be retried again, focusing on the time limit of five seconds between activities.
