Replacing the top stop lamp on the Honda Civil 8

To replace the top stop lamp on the Honda Civil 8: Open the trunk lid. Disconnect the "2P" connector, then turn the lamp holder 45 degrees counterclockwise and remove the lamp. The lamp power of the stop lamp is 21.

1. Open the trunk lid.
2. Disconnect the "2P" connector, then turn the lamp holder 45 degrees counterclockwise and remove the lamp.
3. The power of the stop lamp is 21 W.
4. Remove the rear shelf and remove the top stop lamp.
5. Set the top stop signal lamp in the reverse order.