The back yard in the Hover does not have intermittent treatment, so you have to turn it on and off at all times. In order for the intermittent mode to appear, it will require a relays from the VAZ-2112 with a continuous regime.
The first thing you need to do is remove the plastic cover under the steering column and find the slot for the bridesmell switches. The connector must be turned off and turned upside down. Left-to-right two black, yellow, yellow, green and brown-green wires are to be found.
The 31st contact relay must be connected to any black wire (mass), 31b-to yellow, 15 to yellow-brown, 86 to green, the brown-green should be cut in half and the end of the wire from the connector to the contact S, and the end of the wire from the close switch to contact J on the relay.
Now the caretaker will work with a controlled pause, and three breakers will be made when the rear window washer is turned on.
