The work will require the same lamp (finis 1511386), a pattern of 37.5 mm x 62 mm, a box cutter, and a screwdriver set (including the star Torx T20).
In the first place, the sun visor should be removed by removing the filler panels and retaining its self-retaining self-restraint. After that, it is necessary to remove the ceiling light by gently touching it with a screwdriver at the front. Next, remove the two screws and remove the central plastic cover. After that, it is necessary to put your hand under the cover of the ceiling and on the sides of the central pluffe to find the wiring of the mirror of the sun visor. It's glued to the plating with a solid sealant that needs to be separated neatly and gradually to avoid breaking the wires.
You can then take the predefined template and attach it to the installation site. The pattern needs to be crunk with a sharp pencil. The uphpler skin needs to be cut with a sharp clerical knife. In the resulting area, a metal plate-mounting plate should be inserted into the plug-in, and then the plug on the plug should be inserted. The installation of the two-side handsets is no different.
