To replace the light bulb of the Ford Focus II fog lamp, the headlight must be removed first. In order to remove the headlamp, the fastening of the headlamp to the "television" shall be turned off and the latch positioned on the main body of the headlamp at the bottom side of the subspace shall be removed. On the right and left headlamps, the latches are positioned on different sides, but in either case, closer to the center of the subspace.
After you release the attachment latch and the wiring, you can remove the headlamp and put it aside without removing the connector from the lamp. By ensuring that access to the main-main-unit-counter-lamp is not available, you must disconnect the connector, rotate the lamp in a clockwise direction, remove it, install a new one, and rotate it clockwise until it is committed. Then, the connector must be attached and the headlight should be installed.
