To start a Citroen C4 from a third party battery, you must access the battery (hereafter referred to as the KBs) of the car that is under the hood. To remove the bonnet bonnet and open it, remove the bonnet from the battery, remove the plastic cover from the battery. Then remove the fuses if you need to remove ACBA itself. Then attach one end of the red wire to the output "+" of the failed battery, and the other to the "+" side of the battery. Attach one end of the green or black wire to the "-" side battery. Enable starter and start the engine. Wait for steady engine idling and remove the wiring.
- To do this you need to unlock the lock of the bonnet from the salon and open it, install the hood at point-blank range, remove the plastic cover from the battery, closing its conclusions.
- Next, remove the fuse box if you want to remove the PAC itself.
- Then add one end of the red wire to the output "+" of the battery, and the other end to the "+" side of the battery.
- Attach one end of the green or black wire to the "-" side battery.
- Start the starter and start the engine.
- Wait for steady operation of the engine at idle speed and remove the connecting wires.
