Removing the generator from the Audi A4 B7

We're taking off a generator on the A43-generation of the 3rd generation in this sequence: Inline the protection of the engine with an inside asterisk (3 salamis) unfastened.Scrub up the shelves and twirl another one, and two nuts to the bumper to the wing.Turn off the two screws and remove the bumper. Take off the intercooler. We turn off the bolts of the "TV" to the wings. We unwind the damper's dampers. We disconnect the compressor and the intercooler. Pull the "TV" forward. Turning the video, turning the roller, loosen the generator belt. We take the video with a suitable bar. We remove the generator from the generator and unplug the wire. We take off the generator. The installation is done in reverse sequence.

1. Unwind the engine protection.
2. The internal asterisk is unfastening the attachment to the bumper (3 caramores).
3. Take off the steps and twirl another samorai and two nut fastenings to the wing.
4. Scrolling the retaining screws to the top of the heat sink ("TV").
5. Disconnect the positions of the front fog lamps and remove the bumper.
6. Scrolling two bolts and removing the bumper amplifier.
7. Take off the interculling air duct.
8. I'm swinging the bolts of the "TV" to the wings.
9. Scrolling the damper's anchorage.
10. Comunplug the compressor and the interculling.
11. Moving the "TV" forward.
12. Turn the roller, relax the belt of the generator.
13. Teach the clip using the appropriate bar.
14. Pull off the generator and disconnect the plush wire.
15. We're filming the generator.
16. The installation is done in reverse sequence.

Add comment