In order to replace the glazing of the front fog lamp, the Aodi 100 4th generation will need a flat-shaped and flat-blade screwdriver, new glass and a seal. Running in this sequence: We unplug the headlights at the bottom of the headlight. Disconnect the connectors. Discard the four samoses and take off the headlight. Disconnect the turning signal by turning the signal and pressing the retainer.
- Unwind the "recorder" at the bottom of the lamp.
- Detach the connectors.
- Scrolling 4 samorez and taking off the headlight.
- Disconnect the turning signal by turning the table and pressing the lock tab.
- Remove the rubber hose by gently clicking its "ears".
- You shut up eight latches and take off the glass with the seal.
- We've got a new glass and a sealant.
- We're gathering it all back.
