The projection of the car's logo on the road is carried out with the help of a projector installed in the lower end of the door. The projector illuminates the space on which the driver or passenger is walking and also "draws" the car's logo on the ground. The logo projectors can be divided into several large groups: Proved projectors: these logo projectors appeared first in the market. To install them, you need to drill a large hole in the car door. Special fresa's in the kit. The incision site must be carefully processed by the anticorrosive structure. The disadvantage of such projectors is obvious-the complexity of the installation. The Projectors of the Logo Logo logo are attached to the inside of the door, to the interior of the door, to the pocket (if any). The drawback is that the projector block is visible, it's pretty massive. Advantages-there is no need to drill the metal door, and it is often possible to change the "cassettes" with the picture that will be projected. The projectors of the logo are also installed on the interior of the door, but they do not need to be connected to the onboard network. The battery is usually long and easily changed. In some of the projectors working on batteries, you can change the "cassettes" with the image. The factory lanterns shall be removed and the projector shall be installed in its position.
- Proved projectors: these logo projectors appeared first in the market. To install them, you need to drill a large hole in the car door. Special fresa's in the kit. The incision site must be carefully processed by the anticorrosive structure. The disadvantage of such projectors is obvious-the complexity of the installation. The projector is not visible.
- Logo projectors placed on a bilateral scotch: the logo projectors are attached to the inside of the door, to the pocket (if any). The drawback is that the projector block is visible, it's pretty massive. Advantages-there is no need to drill the metal door, and it is often possible to change the "cassettes" with the drawing that will be projected.
- Battery-operated logo projectors: these logo projectors are also installed on the interior of the door, but they do not need to be connected to the onboard network. The battery is usually long and easily changed. In some of the projectors that work on batteries, you can change the "cassettes" with the picture.
- Logo projectors installed in place of regular light-lighting devices: the most convenient solution provided that the car already has a lighting light for the space in front of the door. The factory lanterns shall be removed and the projector shall be installed in its position.
The logo projectors can be monochrome or colored. When connecting the projector to the onboard network, the instructions must be strictly followed.