To remove the front bumper, do the following:
1) Remove the heat sink grill.
(2) Remove the front cover.
(3) Bend four upper anchorage bolts and three lower bumper bolts.
(4) Bend 6 bolts of the lower side anchorage in the wheel arches area.
(5) Deter wheel rails on the left and right.
6) Exhitch 4 bolts for wheel arches.
(7) Confronting the side of the bumper in the direction of the bumper.
(8) Gently pull the bumper and remove it.
9) Disconnect all the connectors and hoses.
(10) Reverse-order installation.