Required tool: Torx keys 20 and 25, M6 polyhedron, clipster. Procedure: To free the trunk, remove the spare unit, close to the spare wheel, and also remove the spare wheel, remove the two clips of the secondary lower lining, with a great effort to remove the trunk from the trunk, remove it from the six clips along the entire length of the trunk threshold, and remove the screws from the side panels, including the screws for the side panels, from the closest to the lanterns to the side of the side panels to the side of the opposite side of the vehicle to pull off the plates.
- Free up the trunk, take out a box of small bits, close behind the spare wheel, and the spare wheel,
- Remove the two clips of the lower middle cladding,
- With a great effort to defleces the facing from the anchorage of the trunk,
- Pull the cover up, remove it from six clips, all the length of the trunk,
- Reinstall the screws on the side panels, including the screws for the side-based hooks on the sides,
- From the side closest to the lanterns to pull the side panels opposite the side of the vehicle to unhook the clipps.