In order to remove the front bumper Suzuki Swift II, three screws are required to be removed: two front fog lamps and one centre. At the top, under the eyelets, unscrew the sour, and with the screwdriver to roll up and remove the pistons, three on each side. Then remove the bumper by putting pressure on its center and pulling it up. Disconnect the connector from the front fog lamps. Remove the grille of the heat sink by unfastening the rack latches. Place the bumper in the following order:
1. Connect the connector to the front fog lamps, hang the bumper on the hooks from the top and screw the three bolts from the bottom.
2. Next, insert the pistons in the covers and twirl the wrinkures.
3. Insert piles on top of the sides and roll the remaining bolts.