On the body of any motor vehicle, sooner or later they appear as if they are spooky and can provoke the emergence of a hotbed of corrosion.
To avoid problems with the varnish coating, you can paint it on your own. But for the paint to lie flat and hold out for a long time, the technology of the paint must be adhered to.
First, it is necessary to determine the place of work. It must be room, as dust and dirt can get on the surface to be treated. The room should have a stable air temperature of at least +20 degrees Celsius.
It's important to pick up the paint right. There are two ways:
1. Buy an original set for paint.
2. To pick up the desired colour, remove any bodywork piece and come to the shop where it is computer-coloring. The most commonly used petrol tank cover is used for this purpose.
The location of the place should be thoroughly cleaned and degreasing. The colour of the paint around the edges of the paint shall be cleaned and shall not be performed.
The split is divided into two types:
1. Skol to ground. In this case, it is enough to cause several layers of paint, to wait for drying out, to cause slouches of lacquer and polish the place of repair
2. Skol to metal. In this situation, it is necessary to cleanse the rust, if any, of the soil with rust converter, wait for its drying out, smoke, and then paint the varnish and varnish as in p. 1.
It should be borne in mind that self-painting of bevels requires patience and respect for technology; otherwise, the place of repair will soon appear as soon as possible.