The Charging of JSCB on Skoda Yeti

1. In order to charge the AKB to Skoda Yeti, turn off the ignition and all consumers of electric power.
2. Fast charger only: disconnect both of the connecting cables (first "minus", then "plus").
3. Then set the charge devices to the pole of the charger (red-"plus", black-"minus").
4. Next, connect the charger to the network and turn on the device.
5. At the end of the charge process: Turn off the charger and remove the network cable from the electrical outlet.
6. Then disconnect the pole-off pressure of the charger.
7. If necessary, reconnect the connectors (first "plus", then minus) to the connectors.
8. When charging a small force (for example, using a portable charger), the connection cables may not be turned off.
9. Before fully charging the ALB, the charge current force shall remain at 0.1 of the size of the ACB or below.

Add comment