In the case of the breakage of the Reno Flüense elevator machinery, in most cases it is necessary to replace it. The procedure is as follows:
- Disconnecting the battery.
- The upholstery of the front door and the sealing film shall be removed.
- We're shooting the door glass.
- Detach the connectors and the electric motor of the window lift.
- With cardboard and tape, we protect the lateral impact sensor from damage.
- Scrolls the bolts 2 and five screws 1 to the mounting of the window-lift.
- We're taking off the window-lift 3 from the door.
- Set up a new mechanism in reverse sequence. It is important to twist the nuts and bolts in the right order.
