The first thing to do is to snout the triangular plastic lining of the rearview mirror and remove it with the seal. Next, you need to twist the carrion, located in the area of the door-opening handle, the screwdriver, located on the door lining, and twist the carrot underneath the door. Then you need to twist the carrot, located in the front of the plating, and the two carroches in the back of the shell. Now we need to unroll the swales inside the door handle (there isn't one on the right door). After that, you can start to shut down the piles of the plating, starting from the bottom. When the groans are clicked, the plating will have to be pulled up and out and disconnected from the door. Only power off the window-lift slot. The assembly is in reverse sequence.