To change the rear sensors of the parktronic on the Chevy Captiva, you need to:
(1) Remove the two carts, remove the reversing lamps.
(2) All bumper fastenings (2 below headlamps, 4 in the upper part, 4 in the lower part, three carrots in the back arch).
(3) Be careful by two hands to pull the side of the bumper (near the wheel) on each side.
(4) Delete rear bumper.
5) Use a screwdriver to detach and detach the sensor connectors.
(6) Remove defective sensors and install new sensors.
(7) Becomes the bumper and headlights.