The headlamp shall be attached to three bolts, two top bolts and one side bolts. You need to remove the screws from the battery by removing the screws. You need to pull the headlight slightly on your own. Next, you need to disconnect the connectors from the passing and driving lamps, the dimensions and the proofreader on the back of the lamp. The assembly is reversed.
- Before you unwind them, you need to remove the minus tick from the battery.
- When the bolts are bolted, you need to gently pull the headlight onto you.
- It is further necessary to disconnect the connectors from passing and driving lamps, dimensions and proofs on the back of the headlamp.
- The assembly is in the reverse order.